Introduction

The Servo Pulse Decoder Card is a decoder for eight channel PPM servo pulse. This card makes possible to connect your R/C transmitter using its budy (trainer) connector directly to the decoder card and connect eight servos and/or speed controller without using R/C receiver, xtals, etc. Beside this the card can be connected to the line output of your computer's sound card. Using an apropriate software (see links below) your computer can generate same signal as your transmitter generates. So without using any additional hardware (except this card and computer) you can test, adjust eight servos, speed controllers, etc.

This card can be very usefull for testing channel assignment, reversing, travel, etc. without receiver and apropriate XTALs or even transmitter.